Elecro Nano Splasher Heater is easy to install with plug-and-play. Robust, durable construction, perfect for heating above-ground pools. Analogue control with 1C differential. Ultra reliable flow switch allows safe operation with 1000 ltr/hr. 316 stainless steel flow tube. May be floor or vertically mounted.

The heater can be vertically wall-mounted or stand on the floor with the control components on the top face casing. Screw fit adapters are supplied to allow connection to standard above-ground pool flexible pipe work, while the water inlet and outlet fittings can be connected to either metric or imperial standard pipes.

The Elecro Nano splasher heater features its unique and proven coiled heating element technology whereby a turbulent vortex is created in the water flow. This delivers outstanding efficiency and extended life expectancy by preventing the build-up of mineral deposits on the heating element.

Robust and reliable, this heater is made to last, affording you the perfect pool temperature with easy-to-use controls.

Features:

Available as 2kW or 3kW
Plug and play – 230v single phase 13amp load
Easy installation, fully equipped and pre-wired
Robust, durable construction
Ultra-reliable flow switch allows safe operation
Supplied with temperature thermostat and overheating sensor
Compact, durable design
Can be used in saltwater
Safety thermal cut-out included (manual reset)
Flow switch – no pump interlock required
2m power cord with UK plug
Analogue control with 1.2°C differential
Titanium flow tube and titanium heating element
Can be floor or vertically wall-mounted
100% efficiency throughout the product life
Silent operation

Technical Information:

Power Output	2kW	3kW
Amp	9	13
Net Weight	18.6kg	18.6kg
Gross Weight	22.5kg	22.5kg
Volume	0.125m³	0.125m³

Specification:

Weight	50 kg
Dimensions	150 × 150 × 150 cm
Power Supply	220-240V single phase
Flow Requirements	Minimum flow: 1m³/h Maximum flow: 17m³/h
Heating Element	Grade 1 titanium
Flow Tube	Grade 1 titanium
Control Thermostat	Analogue: 0>45°C (1.2°C differential)
Safety Thermal Cut Out	60°C (manual reset)
Flow Switch	Gold tipped reed switch with titanium fulcrum pin
Relay	Surface mount DPDT Finder 66.82.8.230.0000
Seals	High temperature special formula EPDM ferrules, TPE end fitting gaskets
Water Connections	1.5″ BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for flexible pipe
Ingress Protection Rating	IP44
Frequency	50/60 Hz
Working Pressure	4 bar maximum
Mounting	Floor or wall mounting

Electro Nano Splasher Pool Heater Pressure Drop | Blue Cube Direct
Safety and equipment protection is provided by a flow switch that operates from as low as 1000 litres per hour. Over-heating protection is provided by a thermal cut-out with manual reset.

Downloads:

Leaflet
Manual

Warranty:

2 years warranty

Electro Nano Heater

Elecro Nano Splasher Heater